Your Cart is Empty
RubiGrid® 2022 Ford Super Duty (Tremor Off-Road + SYNC 4) Dash Mount Phone + Device Holder
$49.99 - $168.49
BMS-SDTremorRubiGridUni
WHAT'S INCLUDED?
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-Compatible Action Camera Mount
(2x) 4-Hole AMPS Balls
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-Compatible Action Camera Mount
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe Compatible Wireless Phone Charger
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe Compatible Wireless Phone Charger
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) XL Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) XL Universal Phone Holders
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) DiabloM6 Magnetic Phone Holders
(4x) Magnetic Plates with Adhesive for phone
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) DiabloM6 Magnetic Phone Holders
(4x) Magnetic Plates with Adhesive for phone
(1x) RubiGrid® Base
VEHICLE FITMENT
Create the Ultimate Ford Super Duty Command Center with RubiGrid®.
If you're looking to securely mount multiple devices in your 2022 Super Duty exactly where you want them without limitations, this is the system you're looking for.
**PATENT PENDING**
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.
Built specifically for the 2022 Ford Super Duty equipped with SYNC 4 or the Tremor Off-road package, mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.
FITMENT & INSTALLATION
- Fits: Super Duty trucks equipped with SYNC 4 or Tremor Off-Road Package
- Lariat, King Ranch, Platinum, Limited
- Does NOT Fit: XL, XLT or any other trucks equipped with SYNC or SYNC 3
Installation is as simple as removing the plastic top dash tray, marking and drilling 4 holes into the plastic dash tray, securing the mounting platform with the included hardware, popping the panel back into place and mounting your devices.
All necessary hardware is included with the exception of a drill.
LIMITED LIFETIME WARRANTY
Our Super Duty RubiGrid® is backed by our industry-leading Limited Lifetime Warranty and we stand behind our products 100%.
T
2022 F350 Bulletpoint RubiGrid Mount ![User picture]()
We travel full time as retirees. I needed something that would not fall off the windshield and I wanted it centrally mounted. The bullet point mount works for me. Installation was easy with the instructions plus youtube videos. I was concerned if the standard length arms would be long enough and they work perfect for my need. When towing i use a GPS, monitor for rear camera, and a TPMS that I mount. The rear camera monitor will be changed out for one that is smaller in size. Otherwise all devises are not higher than the wiper blades when looking out the windshield. I have used one of the wire guides as a bumper to remove vibration/bouncing from the rough roads. So far very pleased with the mount. I did get the mount for the phone which I use when not using the trailer camera monitor.
G
Muy bueno
R
Solid
First impressions opening the box was the quality. You could tell it was well made. Pretty straightforward install and looks like it could’ve been a factory option.
C
Great addition
This is a great addition to my f350. Finding a solid, easy to install, and good looking phone and accessory mount is tough. Bullet point hits all three marks.
J
Quality ![User picture]()
![User picture]()
Great product secure phones easy install my pic look like most out there I did cut the plug cover to stop the blue light on charger could of mounted it in tray and may of solved the reflection on windshield love the cradle charger also and have ordered a 2nd one all ready cable control is a must and is simple with this product
Don’t forget customer service is also top notch
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
