Your Cart is Empty
New
RubiGrid® 2019+ Mercedes-Benz Sprinter Van Dash Mount Phone + Device Holder
$89.99 - $199.99
BMS-MBSpG3RubiGridUni
WHAT'S INCLUDED?
(1x) RubiGrid® Dash Mount
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) RubiGrid® Dash Mount
(2x) 4-Hole AMPS Balls
(2x) 4cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 4cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(1x) RubiGrid® Dash Mount
(2x) 4-Hole AMPS Balls
(2x) 4cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(2x) 4-Hole AMPS Balls
(2x) 4cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(1x) RubiGrid® Dash Mount
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) RubiGrid® Dash Mount
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(4x) Metal Plates with adhesive for phones
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(4x) Metal Plates with adhesive for phones
(1x) RubiGrid® Dash Mount
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) RubiGrid® Dash Mount
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) RubiGrid® Dash Mount
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) RubiGrid® Dash Mount
(1x) 4-Hole AMPS Ball
(1x) 4-Hole AMPS Ball
VEHICLE FITMENT
Customize your Sprinter Van's Command Center with RubiGrid®
If you're looking to securely mount multiple devices exactly where you want them in your 2019+ Mercedes Sprinter Van, RubiGrid® is the solution you've been looking for.
RubiGrid® for the Sprinter Van is the ultimate interior accessory allowing you to securely mount all of your necessary devices while freeing up valuable space in your van. No blocking of air vents and no obstructing your view.
It's time to embark on memorable adVANtures with an organized command center.
**PATENT PENDING**
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.
Mount multiple devices along the all-metal mount and easily change the configuration and location of your mounting balls to dial in your perfect setup. Customize your ultimate adventure-ready command center.
MORE THAN JUST A SPRINTER VAN PHONE MOUNT
Our Sprinter Van mount was designed to hold much more than just your phone. Whether you need to mount phones, tablets, action cameras, GPS units, backup cameras, TPMS monitors or radios, RubiGrid® can handle it.
Since our RubiGrid® dash mount is AMPS-compatible, that means our mount is compatible with 3rd party manufacturers that use AMPS standard specifications.
OEM-LIKE FITMENT
Our RubiGrid® dash mount was designed specifically for the 2019+ Mercedes Sprinter Van and has the look and feel of a factory-installed option. It follows the lines of the radio bezel surrounding the head unit for a clean, OEM-like look.
Your Sprinter Van deserves this level of quality and attention to detail.
ROCK SOLID INSTALLATION
Installation requires the removal of the radio bezel along with drilling 6 small holes in order to securely mount our RubiGrid® dash mount to your vehicle using nuts & bolts. All necessary hardware is included.
Our easy-to-follow instructions make installation a breeze and the end result is a rock solid mounting point for your devices that you can depend on.
Equip your Sprinter Van with the ultimate dash mount and hit the road with confidence.
Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder. We recommend using 4-Hole AMPS balls and 4cm mounting arms.
Customer Reviews
Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
G
Very nice high quality product.
M
Great mount, instructions need an update
Just installed in my 2024 Sprinter. Love the mount. The instructions need to be updated for the step to remove the air vents. You don't pry the vents off (prying will just remove the trim ring, which is unnecessary). You need to use a hooked pick to grab into the removal hole down inside the vent to pull the whole vent out of the dash. This YouTube video shows you how: https://www.youtube.com/watch?v=bTCXKjOT9R4
R
Rubigrid on my 2020 MB Sprinter 4x4 ![User picture]()
Fitment is very good, install not to bad and relatively easy. I would have liked this even more if it were made out of aluminum, just so it could lose a little weight. I understand it’s more cost effective in steel and helps keep the product cost down, so I get it.. Still it’s a Great product for mounting phones, radios and such.
J
Sprinter van mount ![User picture]()
![User picture]()
Just installed the Rubigrid mount in my 2024 sprinter van and I absolutely love it. The install was straightforward and the fit and finish is just as expected from such a great company. Can’t wait to add more accessories!
B
Never Disappointing
I waited 6 months for my mount to be released! And the wait was well worth it. Had a ram 1500 and had the dash mount for it and loved it. Got rifles of my Ram and got a new Sprinter and was disappointed that I couldn’t find a mount that worked well and Bulletpoint didn’t have one. Looked online and saw Bulletpoint was releasing one and jumped on the list. As soon as I got the email that it was released I ordered it immediately because I knew it was going to be epic. Sure enough this thing is a beast and worth every month I waited!
WELL DONE AGAIN AND KEEP DOING WHAT YOUR DOING!
If you’re questioning yourself to get one……DON’T,…..JUST ORDER IT AND ENJOY.
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
