Your Cart is Empty
RubiGrid® 2009-2014 Ford F-150 Dash Mount Phone + Device Holder (12th Generation)
$39.99 - $157.49
BMS-F150G12RubiGridV2Uni
WHAT'S INCLUDED?
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-Compatible Action Camera Mount
(2x) 4-Hole AMPS Balls
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-Compatible Action Camera Mount
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4-Hole AMPS Ball
VEHICLE FITMENT
Our Most Customizable 12th Generation F-150 Dash Mount.
If you're looking to securely mount multiple devices in your F-150 exactly where you want them without limitations, this is the system you're looking for.
**PATENT PENDING**
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.
Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.
In fact, RubiGrid® for the 2009-2014 F-150 can mount up to 5 devices!
INSTALLATION
Installation is as simple as removing the plastic top dash tray, marking and drilling 4 holes into the plastic dash tray, securing the mounting platform with the included hardware, popping the panel back into place and mounting your devices.
All necessary hardware is included with the exception of a drill.
LIMITED LIFETIME WARRANTY
The 12th Generation F-150 RubiGrid® is backed by our industry-leading Limited Lifetime Warranty and we stand behind our products 100%.
J
Awesome mount ![User picture]()
![User picture]()
Very easy install. Took about 10 minutes. Worth every penny.
D
Three vehicles and going…
I have your products in three of my vehicles and each installation works great. Top notch quality!
F
Great quality and packaged well. Delivery time perfect.
G
Nice piece!
It's a little pricey but worth the money! Solid construction, easy to install and looks great. Would definitely recommend!
B
Wish I would have found this years ago
After about 3 different windshield and dash mount systems I finally found the last one Ill ever need. Great product and great construction. That's good and Bad. Good for me, bad for Bullet point. I wont need to buy another one, built to last.
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
