Your Cart is Empty
RubiGrid® 2015-2020 Ford F-150 + 2017-2022 F250/F350/450 + 2018-2021 Ford Expedition Dash Mount Phone + Device Holder (13th Generation)
$49.99 - $168.49
BMS-F150G13RubiGridUni_Tablet
WHAT'S INCLUDED?
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-Compatible Action Camera Mount
(2x) 4-Hole AMPS Balls
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-Compatible Action Camera Mount
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe Compatible Wireless Phone Charger
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe Compatible Wireless Phone Charger
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) XL Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) XL Universal Phone Holders
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) DiabloM6 Magnetic Phone Holders
(4x) Magnetic Plates with Adhesive for phone
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) DiabloM6 Magnetic Phone Holders
(4x) Magnetic Plates with Adhesive for phone
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4-Hole AMPS Ball
VEHICLE FITMENT
Create the Ultimate Ford Command Center with RubiGrid®.
If you're looking to securely mount multiple devices in your F-150, Super Duty or Expedition exactly where you want them without limitations, this is the system you're looking for.
**PATENT PENDING**
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.
Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.
In fact, RubiGrid® for the 2015-2020 F-150 can mount up to 6 devices (5 AMPS Balls + 1/4"-20 adapter).
Our RubiGrid® dash mount sits approximately 1-inch higher for improved visibility and clearance from the dash.
INSTALLATION
Installation is as simple as removing the plastic top dash tray, marking and drilling 5 holes into the plastic tray, securing the mounting platform with the included hardware, popping the panel back into place and mounting your devices.
All necessary hardware is included with the exception of a drill.
LIMITED LIFETIME WARRANTY
The 13th Generation F-150 RubiGrid® is backed by our industry-leading Limited Lifetime Warranty and we stand behind our products 100%.
J
The little bit on the expensive side but worth it ![User picture]()
Thing is sweet
A
Solid mount ![User picture]()
![User picture]()
![User picture]()
I installed this in August and just returned from a 10k trip through 21 states. The roads are rough but this mount is solid and kept my Flurion camera, Garmin and tpms upright and visible yet not in line of sight while driving. I kept the mounting arms short to minimize vibration.
J
F150 RubiGrid
The perfect mounting solution for for my F150 Platinum- it provides a variety of options for various devices.
B
2019 F150
Installation was easy and convenient. Love this mounting system.
J
Awesome Product
The quality of the product is great. The fit and finish are on point. The installation video and instructions could not make this more easy. Thank you!
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
